• Advertisement

Going Pro?

If you own the company, this is the place for FREE advertisement. But we may ask for evaluation and test samples...
Please be kind.

Re: Going Pro?

Postby Kapea » Thu Jul 31, 2014 1:31 am

vb wrote:prototype 150 gallon electric bain marie system. prepping for a whiskey run.
Image

Nice finish detail on the stainless!
Image
User avatar
Kapea
 
Posts: 1928
Joined: Sat Jan 28, 2012 11:02 pm
Location: The far side of BFE - In the tropics x UTC -10
Equipment type: 50mm x 1250mm copper & stainless VM column
50mm copper & stainless pot still
Modular multi-plate 4" bubbler

Re: Going Pro?

Postby Mb6388 » Sat Aug 02, 2014 8:31 am

Very nice !!!!
How long are the heat up times ?
Mb6388
 
Posts: 106
Joined: Fri Apr 05, 2013 9:16 am
Location: North east

Re: Going Pro?

Postby vb » Sat Aug 09, 2014 7:57 pm

running all six elements about the same as steam, a little under an hour.
the folks running this system have limited amperage, but with 3x 3500w elements its about 2 hours to heat up.
See You Next Tuesday.
User avatar
vb
 
Posts: 3868
Joined: Fri Dec 05, 2008 5:38 pm
Location: True North Strong and Free
Equipment type: yes, and lots of it

Re: Going Pro?

Postby Pop Larkin » Sat Aug 09, 2014 10:30 pm

DAMN VB. You guys are putting out some gorgeous stuff !!!!
"It's an old trick but it just might work"
User avatar
Pop Larkin
 
Posts: 579
Joined: Wed Apr 08, 2009 10:34 pm
Location: Bright Sunny South
Equipment type: 100 cup coffee urn Pot Still with "RumBull" style Scotch Sankey head.

Re: Going Pro?

Postby vb » Tue Aug 12, 2014 8:03 pm

See You Next Tuesday.
User avatar
vb
 
Posts: 3868
Joined: Fri Dec 05, 2008 5:38 pm
Location: True North Strong and Free
Equipment type: yes, and lots of it

Re: Going Pro?

Postby zedzedtop » Thu Aug 14, 2014 10:00 pm

When life gives you molasses....
'Bubble cap plates are better for batch distillation than perforated plates' - Benjamin Franklin

Fortune cookie: Your whole family are well
User avatar
zedzedtop
 
Posts: 2519
Joined: Fri Sep 18, 2009 11:20 pm
Location: NorCal
Equipment type: 25G pot, gas or 4500w
pot head or 4'' 3plate bubbler, cm

Re: Going Pro?

Postby vb » Sat Dec 20, 2014 1:00 pm

to be auctioned off at this years ADI conference
30 gallons capacity, so would make for a nice proofing still.

Image
See You Next Tuesday.
User avatar
vb
 
Posts: 3868
Joined: Fri Dec 05, 2008 5:38 pm
Location: True North Strong and Free
Equipment type: yes, and lots of it

Re: Going Pro?

Postby vb » Fri Jan 30, 2015 11:39 pm

Image
See You Next Tuesday.
User avatar
vb
 
Posts: 3868
Joined: Fri Dec 05, 2008 5:38 pm
Location: True North Strong and Free
Equipment type: yes, and lots of it

Re: Going Pro?

Postby just sayin' » Sat Jan 31, 2015 6:35 am

Bee-Utiful! Copper and stainless look very nice together. You are a master, VB!
just sayin'
 
Posts: 711
Joined: Sat Jan 26, 2013 5:32 pm

Re: Going Pro?

Postby Bushman » Sat Jan 31, 2015 10:11 am

Unbelievable work, wish I was attending the ADI conference again this year as I would love to see you guys again. My wife booked the month of March returning April 3rd in Hawaii so looks like I will have to put it on hold for another year.
User avatar
Bushman
 
Posts: 1536
Joined: Sun Feb 06, 2011 8:28 am
Location: Pacific Northwest US
Equipment type: I have a VM still with a 2" column and a keg for a boiler and a 4" CM still that runs on electric heat.

Re: Going Pro?

Postby Mud » Sat Jan 31, 2015 11:04 am

Beautiful stuff, buddy. Better than most children who smoke could do.
Specialization is for Kiwi.
Artisan Distilling Book
User avatar
Mud
 
Posts: 4338
Joined: Wed Dec 10, 2008 5:10 pm
Location: The wilds of PA, USA
Equipment type: Keg based pot - sometimes propane powered but mostly electric

Re: Going Pro?

Postby vb » Fri Jul 17, 2015 12:45 pm

on the smaller side of professional gear, 250L or 60 gallons

Image
See You Next Tuesday.
User avatar
vb
 
Posts: 3868
Joined: Fri Dec 05, 2008 5:38 pm
Location: True North Strong and Free
Equipment type: yes, and lots of it

Previous

Return to Commercial Links

Who is online

Users browsing this forum: No registered users and 2 guests