• Advertisement

Cast Iron

This is the junk yard of topics. For topics that don't fit anywhere else.

Re: Cast Iron

Postby Pa_bon » Mon Dec 18, 2017 7:46 pm

Used to use linseed oil to finish and maintain gunstocks.
Overhead the albatross
Hangs motionless upon the air
And deep beneath the rolling waves
In labyrinths of coral caves
An echo of a distant time
Comes willowing across the sand
And everything is green and submarine

Pink Floyd
User avatar
Pa_bon
 
Posts: 352
Joined: Tue Feb 23, 2016 9:30 am
Location: Right here. Really, I'm right here.

Re: Cast Iron

Postby S-Cackalacky » Tue Dec 19, 2017 8:07 am

The type of linseed oil sold at art supply stores, I'm pretty sure, is just pure linseed oil. It's used to mix with artist oil paints. Turpentine is sold separately to mix with the linseed oil to thin it and speed up drying time. Walnut oil might also be used, but more expensive. I guess the point is that some seed and nut oils dry hard, whereas others just become sticky.
User avatar
S-Cackalacky
 
Posts: 442
Joined: Fri Dec 18, 2015 1:13 pm
Location: The Mountains of Virginia

Re: Cast Iron

Postby rockchucker22 » Tue Dec 19, 2017 8:14 pm

S-Cackalacky wrote:The type of linseed oil sold at art supply stores, I'm pretty sure, is just pure linseed oil. It's used to mix with artist oil paints. Turpentine is sold separately to mix with the linseed oil to thin it and speed up drying time. Walnut oil might also be used, but more expensive. I guess the point is that some seed and nut oils dry hard, whereas others just become sticky.

Great post. :8)
dancing on wire both ends are on fire
User avatar
rockchucker22
 
Posts: 664
Joined: Mon Dec 06, 2010 9:02 am

Re: Cast Iron

Postby Saltbush Bill » Sat Dec 23, 2017 3:10 am

Ive been away and missed quite a bit of this discussion.
People will argue the pros and cons of different cooking oils for seasoning all day.
My only comment is that in my experience they all work, I use cheap spray on canola oil these days though Ive tried many different sorts over the years.
As has been stated a thin layer of oil is best, to much leads to a bad seasoning job.
One simple way of seasoning new cast iron is to wipe it over with a thin layer of oil. then heat your hooded BBQ to its maximum heat with the chosen object inside the BQQ, leave it there until your oiled cast iron stops smoking and becomes darker in color than it was. DO put the pot , camp oven , fry pan in the BBQ upside down, this stops oil pooling in the bottom which is something to be avoided at all cost. Repeat , repeat , repeat if necessary. Once you have it well seasoned you should be able to maintain the layer of seasoning with everyday cooking / use. Do not use harsh abrasives when cleaning your cast iron or you risk damaging the seasoning. Mostly stuck food if any will wipe out after a quick soak in hot water.
Saltbush Bill
 
Posts: 130
Joined: Tue May 03, 2011 9:00 pm
Location: Australia NSW Richmond Tweed
Equipment type: 2 inch pot still 25L boiler. 2 1/2 inch pot still 50L boiler

Re: Cast Iron

Postby punkin » Sun Jan 28, 2018 1:33 pm

porkchop2.jpg


porkchop1.jpg
Image

Identified Shit Stirrer, upgraded to sociopath.

To the fashionable nationalists



http://www.stilldragon.com.au for all your distilling needs in Australia and New Zealand
User avatar
punkin
 
Posts: 11353
Joined: Sun Dec 16, 2007 2:09 pm
Location: Northern NSW Orstrailya

Re: Cast Iron

Postby Saltbush Bill » Tue Jan 30, 2018 5:43 am

That doesn't look seasoned to me , My guess is that things still stick in it at this stage.
Saltbush Bill
 
Posts: 130
Joined: Tue May 03, 2011 9:00 pm
Location: Australia NSW Richmond Tweed
Equipment type: 2 inch pot still 25L boiler. 2 1/2 inch pot still 50L boiler

Re: Cast Iron

Postby punkin » Tue Jan 30, 2018 1:37 pm

Seems to work ok. I use it often, not sure how to get it more seasoned than using it.
Image

Identified Shit Stirrer, upgraded to sociopath.

To the fashionable nationalists



http://www.stilldragon.com.au for all your distilling needs in Australia and New Zealand
User avatar
punkin
 
Posts: 11353
Joined: Sun Dec 16, 2007 2:09 pm
Location: Northern NSW Orstrailya

Re: Cast Iron

Postby RedwoodHillBilly » Tue Jan 30, 2018 2:58 pm

punkin wrote:Seems to work ok. I use it often, not sure how to get it more seasoned than using it.


After initial seasoning, the best way to get a good seasoned piece is to use it. BTW, a very good resource for cast iron, cleaning, seasoning, and collecting is http://www.castironcollector.com/forum/index.php as well as their parent site http://www.castironcollector.com. I am active there and have learned quite a lot. I wouldn't call myself a collector as such, but I have way too much cast iron.
John Barleycorn must die.
"and little Sir John in the nut brown bowl proved the strongest man at last.
The huntsman he can't hunt the fox, nor so loudly to blow his horn,
and the tinker he can't mend kettle nor pots without a little barleycorn."
User avatar
RedwoodHillBilly
 
Posts: 76
Joined: Fri Jan 29, 2016 8:17 pm

Re: Cast Iron

Postby Saltbush Bill » Wed Jul 04, 2018 4:16 am

Had a bit of a cook up one weekend not long ago. lamb shanks , spuds and chicken wings done in camp ovens. Other assorted goodies like sour cream for the spuds and a few nice salads to go with it all. It turned out to be a great day.
Image
Image
Image
Saltbush Bill
 
Posts: 130
Joined: Tue May 03, 2011 9:00 pm
Location: Australia NSW Richmond Tweed
Equipment type: 2 inch pot still 25L boiler. 2 1/2 inch pot still 50L boiler

Re: Cast Iron

Postby just sayin' » Thu Jul 05, 2018 3:09 pm

You have my mouth watering...
just sayin'
 
Posts: 727
Joined: Sat Jan 26, 2013 5:32 pm

Re: Cast Iron

Postby Copperhead road » Fri Jul 06, 2018 2:36 am

Salty you win! :roflmao: :roflmao:
Mad collection bro. :rkn:
my pet is a CCSC copper flute, I feed it corn and it pisses likker like a pony....
User avatar
Copperhead road
 
Posts: 107
Joined: Fri Mar 23, 2018 6:51 am
Location: Brisvegas

Re: Cast Iron

Postby just sayin' » Wed Jul 11, 2018 8:56 pm

Saltbush, what is the diameter of your LARGE oven? That beast is seriously spacious, as Copperhead said you win.
just sayin'
 
Posts: 727
Joined: Sat Jan 26, 2013 5:32 pm

Re: Cast Iron

Postby Saltbush Bill » Sat Jul 14, 2018 7:14 am

The one in that photo is a 24 inch oven, the smaller one next to it is a 12 inch, which is a fairly standard size oven that you would normally see in use.
I have almost all sizes in my collection from 24 inch down the smallest ovens made , an 8 inch.
Saltbush Bill
 
Posts: 130
Joined: Tue May 03, 2011 9:00 pm
Location: Australia NSW Richmond Tweed
Equipment type: 2 inch pot still 25L boiler. 2 1/2 inch pot still 50L boiler

Previous

Return to Off Topic Discussion

Who is online

Users browsing this forum: No registered users and 2 guests