• Advertisement

Special thanks

This is the junk yard of topics. For topics that don't fit anywhere else.

Special thanks

Postby Bushman » Mon Mar 07, 2016 2:41 pm

This weekend I was running an AG Rye/Corn when my controller fried. I have been using a controller that was assembled in a box way to small and so I had to put rubber tubing inside to separate wires from shorting. Well this weekend it was toast. I drained my mash back into carboys and Saturday I ordered a new DIY Controller Kit from Still Dragon USA. They were closed over the weekend but this morning I had an email as I woke up saying the kit had been shipped. Excellent customer service!
User avatar
Bushman
 
Posts: 1536
Joined: Sun Feb 06, 2011 8:28 am
Location: Pacific Northwest US
Equipment type: I have a VM still with a 2" column and a keg for a boiler and a 4" CM still that runs on electric heat.

Re: Special thanks

Postby Kapea » Mon Mar 07, 2016 2:55 pm

All of my experiences with StillDragon have been the same as yours Bushman. They are first rate in customer service for sure!
Image
User avatar
Kapea
 
Posts: 1928
Joined: Sat Jan 28, 2012 11:02 pm
Location: The far side of BFE - In the tropics x UTC -10
Equipment type: 50mm x 1250mm copper & stainless VM column
50mm copper & stainless pot still
Modular multi-plate 4" bubbler

Re: Special thanks

Postby mort4 » Mon Mar 07, 2016 7:30 pm

:8) . Yes indeed.
Once in a while you get shown the light in the strangest of places if you look at it right
User avatar
mort4
 
Posts: 1894
Joined: Fri May 25, 2007 12:46 am
Location: USA Northwest Coast (Southeast Alaska)
Equipment type: 2"x50" copper VM, with 8" dixiedrifter reflux coil and SD torpedo.
2" potstill head, 36" liebig product condenser. Propane fired. Three plate SD bubbler.
Member of Hobby Distillers Association

Re: Special thanks

Postby Zymurgy Bob » Tue Mar 08, 2016 12:42 am

I've only ordered a couple of things from SD, the power controller and the element mounting kit, but I've been favorably impressed.
Zymurgy Bob, a simple potstiller http://www.kelleybarts.com/zymurgy-bob- ... e-spirits/

You can make whisky in a reflux still, you can make vodka in a potstill,
and you can eat chicken noodle soup with a crescent wrench. But...
User avatar
Zymurgy Bob
 
Posts: 2790
Joined: Sat May 30, 2009 3:03 pm
Location: Upper-left US
Equipment type: 60L unpacked 20"x2", propane, with Liebig

Re: Special thanks

Postby Azframer » Tue Mar 08, 2016 1:40 am

Fester picked a good guy to handle it in the US Punki sounds like he got it handled pretty sporty down under too,

Rick
Friends call me Rick
Drank all night and I am still thirsty!
But I don't feel like I got to much blood in my alcyhol.
User avatar
Azframer
 
Posts: 1479
Joined: Sat Oct 23, 2010 2:24 pm
Location: Navajo Rez, Arizona
Equipment type: 5 Gallon Pot Still, Dash1


Return to Off Topic Discussion

Who is online

Users browsing this forum: No registered users and 4 guests