• Advertisement

Testing the SPP

These usually have the means for returning the spirits to the column and usually allow metering of the take off to help in the reflux.

Re: Testing the SPP

Postby manu de hanoi » Fri Feb 24, 2017 10:18 am

plipek told me in MP he meant 1.6cm instead of 1.6 mm HETP
User avatar
manu de hanoi
 
Posts: 1614
Joined: Fri Dec 05, 2008 11:40 am
Equipment type: http://www.stainlessstuff.net

Re: Testing the SPP

Postby FullySilenced » Fri Feb 24, 2017 10:20 am

I knew he had typed and error .... i looked at his website..

FS
User avatar
FullySilenced
 
Posts: 255
Joined: Mon Apr 15, 2013 5:18 am

Re: Testing the SPP

Postby Swedish Pride » Fri Feb 24, 2017 10:22 am

still claims to be better by a good bit compared to Rikus results.
I too would be able to do some testing
Swedish Pride
 
Posts: 95
Joined: Sun Aug 16, 2015 12:52 pm
Location: Eire

Re: Testing the SPP

Postby manu de hanoi » Fri Feb 24, 2017 12:47 pm

FullySilenced wrote:I knew he had typed and error .... i looked at his website..

FS

the error is on the website too....
on the english page the HETP is 1.6mm and 20 mm on the polish page
User avatar
manu de hanoi
 
Posts: 1614
Joined: Fri Dec 05, 2008 11:40 am
Equipment type: http://www.stainlessstuff.net

Re: Testing the SPP

Postby rkr » Sun Feb 26, 2017 3:42 pm

Swedish Pride wrote:still claims to be better by a good bit compared to Rikus results.
I too would be able to do some testing


It should be possible to get lower Hetp values if everything is carefully tuned to optimum values. In my case I did a practical comparison to scrubbers using parameters that normal distiller can easily achieve and that work with scrubbers as well. Add a power controller and some experimentation with vapor speeds and 20mm might well be possible.

Slainte, Riku
"Designing and building automatic stills" -> http://www.amphora-society.com
User avatar
rkr
 
Posts: 369
Joined: Mon Dec 22, 2008 10:05 pm
Equipment type: You name it, I've built it. Well, almost all of them.

Previous

Return to Packed Columns

Who is online

Users browsing this forum: No registered users and 5 guests