• Advertisement

Copperhead roads introduction

Here is the place to say hello to our newest member.
Forum rules
All new users are confined to this section. In order to be promoted out of the Novice and into the regular Distiller, you have to demonstrate maturity, a certain level of distilling and fermenting knowledge. You must also prove that you are helpful to others and not have a propensity toward bad attitude.
You will be promoted out of this section once the demonstration is complete. I hope these goals are enough to allow you to grow out of the Novice Distillers.
If any of your first twenty-five posts is a link to another site or an advertisement of any kind you will be considered a spammer. The account will be deleted and all posts removed. Your IP address, e-mail address and user name will reported to http://www.StopForumSpam.com

Copperhead roads introduction

Postby Copperhead road » Tue Apr 03, 2018 7:48 am

Hi everyone,

I am pleased to see a lot of familiar names and friends here, that’s a warm welcome in itself. For those that don’t already know I’m a brisvegas lad from OZ.
I have been stillin for a while now and UJ whiskey & fruit Brandy’s are my preferences. I have a couple of tools in my toolbox-
50L copper potstill with shotgun PC & all copper polished modular 5 plate flute sitting on a 50L boiler

Anyways glad you guys have accepted me in your community here.
my pet is a CCSC copper flute, I feed it corn and it pisses likker like a pony....
User avatar
Copperhead road
 
Posts: 107
Joined: Fri Mar 23, 2018 6:51 am
Location: Brisvegas

Re: Copperhead roads introduction

Postby S-Cackalacky » Tue Apr 03, 2018 10:39 am

Welcome in! I didn't realize you weren't already here.
User avatar
S-Cackalacky
 
Posts: 442
Joined: Fri Dec 18, 2015 1:13 pm
Location: The Mountains of Virginia

Re: Copperhead roads introduction

Postby Tdick » Tue Apr 03, 2018 12:07 pm

S-Cackalacky wrote:Welcome in! I didn't realize you weren't already here.

:arrow:
User avatar
Tdick
 
Posts: 91
Joined: Mon Jul 31, 2017 9:28 pm
Location: The Deep South
Equipment type: Copper 5 gallon pot still with thumper & worm.

Re: Copperhead roads introduction

Postby punkin » Tue Apr 03, 2018 1:30 pm

Welcome, have access.
Image

Identified Shit Stirrer, upgraded to sociopath.

To the fashionable nationalists



http://www.stilldragon.com.au for all your distilling needs in Australia and New Zealand
User avatar
punkin
 
Posts: 11353
Joined: Sun Dec 16, 2007 2:09 pm
Location: Northern NSW Orstrailya

Re: Copperhead roads introduction

Postby Copperhead road » Tue Apr 03, 2018 4:14 pm

S-Cackalacky wrote:Welcome in! I didn't realize you weren't already here.


:wink: one of our friends told me about this place so I decided to knock on the door. Looks like the whole crew is here :roflmao:
How did I not hear about this forum until recently :doh:
my pet is a CCSC copper flute, I feed it corn and it pisses likker like a pony....
User avatar
Copperhead road
 
Posts: 107
Joined: Fri Mar 23, 2018 6:51 am
Location: Brisvegas

Re: Copperhead roads introduction

Postby Kareltje » Tue Apr 03, 2018 5:01 pm

Welcome. This is a nice forum indeed.
Focused on the hobby above all. And open for unusual ideas.
Kareltje
 
Posts: 242
Joined: Wed Sep 07, 2016 5:45 pm

Re: Copperhead roads introduction

Postby Saltbush Bill » Tue Apr 03, 2018 6:13 pm

G'day Copper ,fancy seeing you here.
Saltbush Bill
 
Posts: 130
Joined: Tue May 03, 2011 9:00 pm
Location: Australia NSW Richmond Tweed
Equipment type: 2 inch pot still 25L boiler. 2 1/2 inch pot still 50L boiler

Re: Copperhead roads introduction

Postby Swedish Pride » Wed Apr 04, 2018 2:27 am

ah yes, the tinnman has joined in to the ranks of forum whores properly now. :P
good to see you here lad
Swedish Pride
 
Posts: 129
Joined: Sun Aug 16, 2015 12:52 pm
Location: Eire

Re: Copperhead roads introduction

Postby Blackstrap » Wed Apr 04, 2018 11:34 am

Hey there Copper... It's a good forum. :) Good to have you finally join us Haha :roll:
"Be yourself; everyone else is already taken."—Oscar Wilde
User avatar
Blackstrap
 
Posts: 15
Joined: Tue Jan 23, 2018 6:49 am
Location: NW Pennsylvania
Equipment type: 15 gallon 3 vessel 2 tier HERMs Brew System

15 gallon Keggle Pot Type still with 3 foot partial column added thumper and 1inch over 1/2 inch liebig condenser 40" long. 70 gallon cooler reservoir, aquarium pump plumbed with 1/2 inch cooling lines.

Re: Copperhead roads introduction

Postby Copperhead road » Wed Apr 04, 2018 4:07 pm

Thanks for the warm welcome guys, I see there is some very experienced punters around these ways that will be able to help me get my Rum legs... :lol:
my pet is a CCSC copper flute, I feed it corn and it pisses likker like a pony....
User avatar
Copperhead road
 
Posts: 107
Joined: Fri Mar 23, 2018 6:51 am
Location: Brisvegas

Re: Copperhead roads introduction

Postby Zymurgy Bob » Thu Apr 05, 2018 10:13 am

S-Cackalacky wrote:Welcome in! I didn't realize you weren't already here.

That's me too. I read several forums, and I guess I don't keep track of who's where. But welcome anyway, Copper.
Zymurgy Bob, a simple potstiller http://www.kelleybarts.com/zymurgy-bob- ... e-spirits/

You can make whisky in a reflux still, you can make vodka in a potstill,
and you can eat chicken noodle soup with a crescent wrench. But...
User avatar
Zymurgy Bob
 
Posts: 2790
Joined: Sat May 30, 2009 3:03 pm
Location: Upper-left US
Equipment type: 60L unpacked 20"x2", propane, with Liebig

Re: Copperhead roads introduction

Postby Copperhead road » Fri Apr 06, 2018 2:46 am

Blackstrap wrote:Hey there Copper... It's a good forum. :) Good to have you finally join us Haha :roll:

Is that you jedneck... :?
my pet is a CCSC copper flute, I feed it corn and it pisses likker like a pony....
User avatar
Copperhead road
 
Posts: 107
Joined: Fri Mar 23, 2018 6:51 am
Location: Brisvegas


Return to Welcome New User

Who is online

Users browsing this forum: No registered users and 3 guests