• Advertisement

Dirt bike (keg?) stand

If you need something maybe someone has found it already. Look here. If you know where supplies are in your area share your knowledge.

Dirt bike (keg?) stand

Postby S-Cackalacky » Fri Apr 14, 2017 6:33 pm

I was in Harbor Freight today and spotted this -
Dirt bike stand.jpg

And, the price -
Dirt bike stand price.jpg

It appears to be made of SS, but not sure. Feels a bit heavy and very sturdy. I thought some here might be interested in it for a keg stand. Already has a hole in it to accommodate a bottom drain.
User avatar
S-Cackalacky
 
Posts: 342
Joined: Fri Dec 18, 2015 1:13 pm
Location: The Mountains of Virginia

Re: Dirt bike (keg?) stand

Postby Desvio » Sat Apr 15, 2017 12:57 am

Huh, never occurred to me... May have to go look at this.
User avatar
Desvio
 
Posts: 8
Joined: Sat Aug 22, 2015 12:10 pm

Re: Dirt bike (keg?) stand

Postby Swedish Pride » Sat Apr 15, 2017 4:01 pm

nice, should be handy enough to add some wheels on it too
Swedish Pride
 
Posts: 95
Joined: Sun Aug 16, 2015 12:52 pm
Location: Eire

Re: Dirt bike (keg?) stand

Postby S-Cackalacky » Sun Apr 16, 2017 6:36 am

I didn't measure the top - looked smaller than the diameter of a normal 50 or 60 liter keg. I'm sure something could be rigged up to fix that issue.

I bought 2 ss bar stools a while back to modify and use as stands (boiler and thumper). If I didn't already have the bar stools, I would definitely go with a couple of these.
User avatar
S-Cackalacky
 
Posts: 342
Joined: Fri Dec 18, 2015 1:13 pm
Location: The Mountains of Virginia

Re: Dirt bike (keg?) stand

Postby Bushman » Sun Apr 16, 2017 7:15 am

How high does it stand S-C?
User avatar
Bushman
 
Posts: 1520
Joined: Sun Feb 06, 2011 8:28 am
Location: Pacific Northwest US
Equipment type: I have a VM still with a 2" column and a keg for a boiler and a 4" CM still that runs on electric heat.

Re: Dirt bike (keg?) stand

Postby S-Cackalacky » Mon Apr 17, 2017 6:56 am

Bushman wrote:How high does it stand S-C?

Not sure - I didn't measure it, but I remember it appearing to be a little taller than I would like. I would say, maybe 18 or 20 inches. Might be an issue with a tall column. The bar stool stand I'll be building will be about 14.5 inches which includes 2.5 inches for the wheels.

With the way the legs are formed, it might be difficult to shorten - maybe from the top. It's all welded together.
User avatar
S-Cackalacky
 
Posts: 342
Joined: Fri Dec 18, 2015 1:13 pm
Location: The Mountains of Virginia


Return to Find Stuff

Who is online

Users browsing this forum: No registered users and 2 guests